We've Moved

The blog has been retired - it's up for legacy reasons, but these days I'm blogging at blog.theodox.com. All of the content from this site has been replicated there, and that's where all of the new content will be posted. The new feed is here . I'm experimenting with crossposting from the live site, but if you want to keep up to date use blog.theodox.com or just theodox.com

Saturday, August 15, 2015

It's that time again! GDC Call for submissions is open!

It's time again for GDC speakers to submit their proposals.  TA's have a long history of providing excellent talks at the main conference and at the Tech Art Bootcamp - so take some time to put together a proposal for this year's conference.

For more on why this is a Good Ideatm, check out last year's post on the same topic.  One important note! This year the call for subs closes on August 27, NOT August 28 as it is in the linked post !

Saturday, August 8, 2015

code wars

By a certain stroke of cosmic irony, it was just after I finished shoe-horning lame Star Wars jokes into my last post that I started to get obsessed with CodeWars, one of the plethora of competitive coding sites that have sprung up in the last few years.

Mostly I find that sort of thing pretty annoying – it’s a genre that all too easily degenerates into macho brogrammer chest-thumping. 90 percent of the code I see on those sites is so tightly knotted – in hopes of scoring fewest-number-of-lines bragging rights – that it’s useless for learning. I’m impressed as hell by this:
f=lambda s:next((t,k)for t,k in map(lambda i:(s[:i],len(s)/i),range(1,len(s)+1))if t*k==s)
but I never want to have to interact with it (Bonus points if you can tell what it does! Post your answer in the comments....)
The nice thing about Codewars is that the experience tends to push you into thinking about how to solve the problems, rather than how to maximize your score. I particularly like two things: first, the site includes a built-in test framework so you can do The Right Thingtm and write the tests before you write the code – not only is it a helpful touch for would-be problem solvers its very effective ‘propaganda of the deed’ for encouranging people to take tests seriours. Second, the site doesn’t just show you the ‘best’ solutions, it shows you all of them – and it allows you to vote both for solutions you think are clever and ones you think embody “best practices.” That snippet I posted above is extremely clever but not a best practice – I wouldn’t let something like that into my codebase if I could avoid it! I’m not smart enough to unriddle such things, though I’m glad they exist.
The other nice thing is that most of the problems are bite-sized, the sort of thing you can chew on while waiting for a longish perforce sync to complete. It’s a great way to practice you coding chops outside all the gnarly things that come with working in a particular problems set for work. I’ve had a work task which involved me in a lot of 5-minute wait times this week and I found CodeWars to be a nice chance to do keep my brains warm while waiting for Perforce.
So, if you’re looking to sharpen up your coding skills you should definitely check out CodeWars. My username is Theodox and in the goofy ninja-academy language of Codewars we can form an ‘alliance’ by following one another. We can make technical art a power in the land!
On the practical side: codewars supports Python, Javascript, and several other languages – they just added C#. It’s great way to get familiar with new syntaxes and to see how folks who know what they are doing tackle problems natively, it’s a great tool to pick up a new language on your own. Give it a shot!

Sunday, August 2, 2015

Return of the namedtuples

I’m sure you’ve read or written code that looks like this:
results = some_function()
for item in results:
    cmds.setAttr(item[0] + "." + item[1], item[2])
Here some_function must be using one of Python’s handiest features, the ability to return lists or tuples of different types in a single function. Python’s ability to return ‘whatever’ - a list, a tuple, or a single object – makes it easy to assemble a stream of data in one place and consume it in others wihout worrying about type declarations or creating a custom class to hold the results. Trying to create a similarly flexible system in, say, C# involves a lot of type-mongering. So it’s nice.
At least, it’s nice at first. Unfortunately it’s got some serious drawbacks that will become apparent after a while – outside the context of a single script or function, relying entirely on indices to keep things straight is dangerous. As so often in Pythonia, freedom and flexibility can come at the cost of chaos downstream if you’re not careful.

I have a bad feeling about this…

Everything will be hunky-dory as long as some_function continues to pack its output the same way. In this example some_function is probably doing something like:

# imagine some actual code here ...
results = []
for node in object_list
    for attrib in attrib_list:
        settable = is_attrib_settable(node, attrib)
        if settable:
           new_value = dict_of_defaults[attrib]
           results.append ([node, attrib, new_value])
return results

Inevitably, though, something will come along that causes the order of the results to change. In a Maya example like this, for example, the likely cause would be some other user of this function finding out that the code needs to set defaults on an unusual value type. setAttr needs to be told what type of data to expect if things are unusual.
That being the case, your teammate extends some_function to output the data type needed. If you’re lucky, the results look like [node, attribute, value, type] and your existing code works fine. But if it changes to [node, attribute, type, value] your existing code will break in wierd ways. Moreover if you haven’t written a lot of comments, the person fixing the bugs will have to sit down and deduce what item[0], item[1] and item[2] were supposed to be.
This example is a perfect illustration unit tests are such a nice thing to have in Python-land: a unit test would probably catch the change in signature right away, alerting your helpful co-worker to the can of worms they have opened up by changing the output of the function. But the real moral of the story is how dangerous it is to rely on implicit knowledge of structures – like the ordering of a list – instead of on explicit instructions. When somebody fails to understand the implications of that ordering, bad things will happen. When the knowledge you need to debug the problem is hidden, things will be
even worse.
Sometimes things get complicated

Return classes strike back

In most languages the way around this is to create a class that holds the results of something like some_function. A result class provides clear, named access to what’s going on:
class SomeFuncResult(object):
     def __init__(self, node, attr, val):
         self.node = node
         self.attribute = attr
         self.value = val

 # and inside of some_function()
    results.append(SomeFuncResult(object, attrib, val))
This means the receiving code is much neater and easier to understand:
results = some_function()
for item in results:
    cmds.setAttr(item.node+ "." + item.attribute, item.value)
This is a better record of what you were trying to achieve in the first place, and it’s also much more survivable: as long as HelpfulCoworker01 does not actually rename the fields in the result object it can be tweaked and updated without causing problems.
For many cases this is the right way to go. However it comes with some drawbacks of its own.
First off – let’s be honest – there’s a lot of typing for something so dull. I always try to leave that out of the equation when I can - the time spent typing the code is such a tiny fraction of the time you’ll spend reading it that trying to save a few keystrokes is usually a Bad Idea (tm). However, typing 5 lines when you could just type a pair of bracket does feel like an imposition – particularly when the 5 lines are 100% boring boilerplate.
The second issue is that, being a class, SomeFuncResult is comparatively expensive: it costs a smidge more in both memory and processor time than just a list or a tuple of values. I’m ranking this behind the typing costs because most of the time that increment of cost doesn’t matter at all: if you’re dealing with a few hundred or even a few thousand of them, at a time the costs for spinning up new instances of SomeFuncResult just to hold data are going to be invisible to users. However if you are doing something more performance-intensive the costs of creating a full mutable object can be significant in large numbers. As always, it’s wiser not to try to optimize until things are working but this is still a consideration worth recalling.
The last issue is that SomeFuncResult can be changed in flight. Since it is a class, the data in a SomeFuncResult can be updated (for you CS types, it is mutable). This means some other piece of code that looks at the result object in between some_function and you might can decide to mess with the results. That can be a feature or a bug depending on how you want to code it – but since Python does not have a built-in mechanism for locking fields in an object, you’d have to put in extra work to make sure the results didn’t get changed by accident if keeping the data pristine was mission-critical. You can use the a property decorator to make a fake read only field:
class SomeFuncResult(object):
     def __init__(self, node, attr, val):
         self._node = node
         self._attribute = attr
         self._value = val

    def node(self):
        return self._node

    def attribute(self):
        return self._attribute

    def value(self):
        return self._value
Alas, our 5 lines of boilerplate have now blossomed into 16. Our quest for clarity is getting expensive.

One common way to get around the hassles – or at least, they typing costs –of custom return objects is simply to use dictionaries instead. If you use the perforce Python API you’ll be quite familiar with this strategy; instead of creating a class, you just return dictionaries with nice descriptive names
for node in object_list
    for attrib in attrib_list:
        settable = is_attrib_settable(node, attrib)
        if settable:
           new_value = dict_of_defaults[attrib]
           results.append ({'node':node, 'attribute':attrib, 'value':new_value})
return results

Like a custom class this increases readability and clarity; it’s also future proof since you can add more fields to the dictionary without messing with existing data.
Even better, dictionaries – unlike classes – are self-describing: in order to understand the contents of a custom result class like SomeFuncResult you’ll have to look at the source code, whereas you can see the contents of a result dictionary with a simple print statement. Dictionaries are slightly cheaper than classes (there is a good workaround to speed up classes, but it’s something you have to write and maintain). And, of course, dictionaries have minimal setup costs: they are boiler-plate free.
This doesn’t mean they are ideal for all circumstances, howerver.
The Achilles’ heel of using dictionaries is keys, which are likely to be strings. Unless you are very disciplined about using named constants for all your result dictionaries you’ll inevitably find that somebody somewhere has type attribite with an extra i instead of a u and suddenly perfectly valid, impeccably logical code is failing because nobody thought to look at the key names. Instead of typing lots of setup code once, you’ll be dribbling out square brackets and quotes till the end of time, with lots of little missteps and typos along the way. While that’s not an insurmoutable problem it’s another annoyance.

Not so scary when you know the secret!

Return of the namedtuples

Luckily there is yet another – and for most purposes better – way to return complex results — one that is both flexible and self-describing. namedtuples are part of the python standard library and they offer a clean, simple way to create lightweight objects that have named properties – like classes – but require almost no setup: you can create a new type of named tuple with a single line of code, and then use it like a lightweight (and immutable) class.
A namedtuple is just a python tuple that can also use names to access it’s own fields. For example:
from collections import namedtuple

# create a namedtuple called 'SomeFuncRes' to hold nodes, attributes and values
SomeFuncRes = namedtuple("SomeFuncRes", "node attribute value")

# make an instance
example = SomeFuncRes('pCube1', 'tx', 33.0)
# Result: SomeFuncRes(node='pCube1', attribute='tx', value=33.0)
As you can see, namedtuples are as even easier to ‘read’ than dictionaries when printed out. However, namedtuples give you dot-access to their contents.
print example.node
# pCube1
This saves a few characters: result.node beats result['node'] – but mopre important offers with far fewer opportunities for mistyped keys or open quotes.
However, namedtuples can also use old-fashioned indexed access too:
print example[0]
# pCube1
And you can even iterate over them if you need to, since a namedtuple is in the end just a slightly fancier tuple:
for item in example:
    print item

# pCube1
# tx
# 30
Namedtuples are easy to instantiate: You can create them using index ordering, names, or **keyword arguments. Names tend to be better for clarity, but if you’re expanding the results of other functions like zip() indices and double-starred dictionaries can be very handy. Having all three options allows you to create them in the most appropriate way.
print SomeFuncRes('pSphere1', 'ry', 180)
# SomeFuncRes(node='pSphere1', attribute='ry', value=180)
print SomeFuncRes(value = 1, node = 'pCube1', attribute = 'tz')
# SomeFuncRes(node='pCube1', attribute='tz', value=1)
from_dict  = {'node':'pPlane1', 'attribute':'rz', 'value':40.5}
# SomeFuncRes(node='pPlane1', attribute='rz', value=40.5)
Unlike classes or dictionaries, namedtuples are immutable; that is, they are read-only by default. This is usually a Good Thing(tm) for a result object, since data changing in mid-flight can lead to subtle bugs that may be very hard to reproduce. Immutability also makes them cheaper: they don’t require Python to do as much setup behind then scenes when a they are created, which can be significant in large quantities. They usually take up less memory as well.
This combination of features is tough to beat in a cheapo data-only class. If for some reason you need to upgrade to a real class instead, you probably won’t even need to change the code which reads your namedtuples: Python doesn’t care if result.node is a namedtuple field or a regular object field. For all these reasons, namedtuples are a great little tool for a lot of common data-bundling jobs. No strategy fits every battle, but namedtuples are an excellent - and often overlooked! – way to manage this very common (albeit not very interesting) problem and to keep your overall toolkit cleaner, more robust and easier to maintain.